Armstrong Temp-R-Drain Condensate Cooler
Armstrong Temp-R-Drain Condensate Cooler. Body material cast iron, preset temp. Body material cast iron, preset temp.
Body material cast iron, preset temp. When hot condensate or hot water is drained into the condensate cooler body, the tempering valve opens and allows cold water. When hot condensate or hot water is drained into the condensate cooler body.
Tempered Condensate Range Factory Preset 135°F (57°C) Field Adjustable Range 115 To 180°F (46.
These condensate coolers help to reduce the temperature of drain discharge to acceptable levels, as required by city and state codes. Armstrong ib trap r/k 5/64: Armstrong’s condensate cooler mixes hot condensate or hot water with a cold water supply to reduce the temperature to acceptable drain temperatures as required by city and state codes.
Communication, Pleasant And Stress Free .
C = cold water temperature h = hot water temperature or condensate temperature example: ~plumbing~pressure and temperature control valves~condensate coolers / each this item requires special shipping, additional charges may apply. Condensate cooler, 12 gpm, cast iron in us by armstrong pneumatic condensate auto drains.
If Cold Water Temperature Or Discharge Temperature Changes, The Capacity Will Change.
Armstrong’s condensate cooler mixes hot condensate or hot water with a cold water supply to reduce the temperature to acceptable drain temperatures as required by city and state codes. Body material cast iron, preset temp. Humidifier parts and drain coolers / condensate drain coolers.
Us Tech Specifications For Condensate Cooler, 5 Gpm, Cast Iron By Armstrong (In Section Pneumatic Condensate Auto Drains).
Us armstrong pneumatic condensate auto drains in top dependable quality. D2902 condensate cooler drain tempering device for mixing hot condensate and cold supply water to maintain a suitable drain outlet temperature armstrong part no: 3/4 in cold water inlet, 1 1/2 in vent outlet item # 30yt84;
Standard Pipe Sizes And Integral Air Gap, Which Allows Unit To Be Hard Piped Into Plumbing System.
When hot condensate or hot water is drained into the condensate cooler body, the. Run drain pipe as directly as possible from the condensate outlets of the steam line to the drain cooler. When hot condensate or hot water is drained into the condensate cooler body.
Comments
Post a Comment